Integrated gearbox vibration sensor XJYD20L

ДоговариваемыйОбновление на05/15

Модель

Природа производителя: Производители

Категория продукта

Место происхождения

Онлайн Консультация

Обзор

The integrated gearbox vibration sensor XJYD20L integrates the vibration velocity sensor and precision measurement circuit together to form a high-precision vibration measurement system ..

Подробности о продукте

Integrated gearbox vibration sensor XJYD20L

The XJ-YD20L gearbox vibration sensor integrates a vibration velocity sensor and a precision measurement circuit to form a high-precision vibration measurement system, which realizes the function of the traditional "sensor+monitoring instrument mode vibration measurement system. The transmitter can be directly connected to DCS, PLC or other equipment, making it an ideal choice for vibration measurement of factory equipment such as fans, motors, water pumps, etc.

Technical Specifications
Power supply: 24VDC ± 10%
Input signal: taken from the signal of the built-in vibration speed sensor
Sensitivity: 20mv/mm/s ± 5%
Frequency response: 10-1000 Hz or 5-1000 Hz (special instructions)
Range: 0-20mm/s (true RMS)
0-200um (peak to peak)
Measurement error: ± 1% of full scale
Output current: 4-20mA
Output impedance: ≤ 500 Ω
Temperature range: -25 ℃ to+65 ℃ during operation
Storage time: -40 ℃~85 ℃
Relative humidity: up to 95%, non condensing
Dimensions: φ 33 × 75mm
Weight: Approximately 340g

Order code
XJ-9200A □□ (optional) - □□ (V/D) - A □□ - B □□ - C □□
Selection Guide
Optional: Waterproof connector □: F-Waterproof connector
Kaizhuang outgoing line □: B-Kaizhuang pipe
Required: Selection Description
Range □□:
Vibration velocity ranging from 10V-0 to 10mm/s; 20V*-0～20mm/s； 30V-0～30mm/s； ……
Vibration displacement ranging from 100D-0 to 100 μ m; 100D-0～200μm； 300D-0～300μm； ……
Installation direction A □:
1- Level; 2- Vertical; 3 * - Universal
Install thread B □:
1*-M10×1.5； 2-M8×1.25； 3- Magnetic seat; 4- Special customization
Cable length C □:
1-1m； 2*-2m； 3-3m； ……
Unless there are special circumstances, the manufacturer produces according to each item; If you have any special requirements, please consult with our company
Selection example: XJ-9200A-20V-A3-B1-C2
Gearbox vibration sensor XJ-YD20L

What is the function and function of the AC/DC transmitter calibration device

TK-3S交直流transmitterVerification device function

1. It can automatically verify the basic errors of electrical measurement transmitters, including voltagecurrent, waveformpower factorThe change caused by the influence quantity, the ripple content and response time in the output DC voltage (current) of the transmitter.

2. It can semi automatically calibrate multiple indicator instruments (including pointer and digital).

3. It can generate distorted waves containing 2-31 harmonics, and the number, order, amplitude, and phase of harmonics on the fundamental wave can be programmed.

When measuring voltage, current, and active power, its accuracy is at level 0.05; Due to the presence of numbers with operating frequencies higher than 60kHz in the device/Frequency converter(DFC) and multiple current ranges, so the accuracy in measuring electrical energy can also be guaranteed at level 0.05. Therefore, this device is actually a fusion measurement transmitter, an AC/DC meter, and an energy meter (optional)detectionIntegrated functionalityhigh precisionA standard device with high stability.

5. EstablishedRS-232interfaceorUSBInterface. throughhost computerThe software, controlled by a PC, allows for automatic or manual inspection of the device and processing and management of the results.

6. It is equipped with a large capacity non-volatile memory that can store 300 pieces of raw data for the detection of the inspected table for reference and upload.

Integrated gearbox vibration sensor XJYD20L

Похожий продукт рекомендовать